MLS

Modular Loudspeaker System

Floorstanding loudspeaker system consisting of separate bass and mid-high units.
This configuration allows total acoustic separation between the sources combined with the possibility of configuring your system in accordance with the size of your listening room and desired sound pressures.
In addition, it is possible to upgrade the system over time by adding and/or replacing modules in order to further improve the acoustic characteristics of the entire system.
For this purpose, new modules for the mid-high section will be added, which will allow, for example, the adoption of two or three bass sections per channel in order to increase the sound capacity for large rooms.
From the driving point of view, it is also possible to transform the system into a fully active system through the adoption of dedicated amplification (already available), this module can also be applied to the bass range alone.
All these upgrades are also possible on already operational configurations without having to replace the entire system.

The MLS system was created with the aim of being able to sonify, at the highest quality levels, medium-small listening rooms as well as large rooms through the various possibilities of configuration of the system itself.
The choice of closed box for the bass section stems from the conviction that this type of system, if well designed, guarantees perfect transient response and undistorted performance down to the lowest frequencies.
The treble section is handled by AMT tweeters (Air Motion Transformers) designed and assembled by us.
The special conformation of the magnetic circuit we applied to these transducers allowed us to achieve an overall extremely balanced and non-fatiguing performance thanks also to a further reduction of the harmonic distortion produced.

  • BASS UNIT:
    2 x 10 inch. anodized aluminum cone woofer
  • TRANSMISSION TYPE: Closed box
  • MID-HIGH UNIT:
    2 x 5 inch. fiberglass cone midrange.
    1 x Polyimide diaphragm AMT tweeter entirely designed and built by us
  • SYSTEM IMPEDANCE: 4 ohms
  • SENSITIVITY: 90dB
  • CROSSOVER FREQUENCIES: 450Hz/2500Hz
  • FREQUENCY RESPONSE: 25Hz-20Khz +/-4db
  • POWER HANDLING: From 30 to 200W RMS 280W peak
  • DIMENSIONS:
    Bass: (H) 885mm. (W) 320mm. (D) 420mm.
    Mid-High: (H) 490mm. (W) 320mm. (D) 260mm.
  • TOTAL WEIGHT: 42Kg
  • AVAILABLE FINISHES:
    Natural black Ebony veneer, Natural Walnut
    Matte finish: black, white, amaranth
    Other finishes available upon request

POSSIBLE CONFIGURATIONS

* Using more than one bass unit per channel is possible only with dedicated amplifier